SEDETA White L Shaped Gaming Desk, Reversible Corner With Power Outlet and Pegboard, Hutch, Storage Shelf, Keyboard Tray, and LED Lights for Home Office

So I like most people read the 1 star reviews. I’m going to address some them. The power outlet is not from the 80s and is safe to use with most things. I only had 1 screw hole not line up and it was because I didn’t follow the directions. I included pictures of the keyboard drawer sliders because it was difficult to see the small details in the picture showing the orientation. I experienced no splinters or any defect in any of the parts except for the one leg it looked like the powder coat was rubbed. This took me about an hour and a half to put together it was not difficult but recommended doing it where you want the desk to go. I did have a screw strip out during the wrong hole fiasco and the included screw driver was poor quality and stripped so I had to use one of my good ones. At the end of the day this is a cheap desk $170 for a desk of this size is a screaming deal. It was a much needed upgrade for me and shipped fast. It feels large and has a lot of work space while simultaneously not taking up too much room. Follow the directions and read the first step about not tightening everything down until it’s assembled and that will prevent the “uneven” wobble. This desk is very sturdy.

I put mine together today and it was pretty straight forward but time consuming. Took about 3 hrs. The box arrived with a few holes in the corners but everything inside was packaged very well. There was styrofoam separating each piece and some of the large desktop pieces even had plastic corner protectors on them. There was no damage to anything in the box. All the screws were in bags with letters on them and they even gave at least 1 extra of each. The instructions were pretty good. There was some confusion on the orientation of the sliding keyboard brackets but it works. My best advice, pay attention to the directions. There are many ways to put this together incorrectly which means you will have to take things apart again. Part of why it took so long to assemble is because I read every detail on the orientation of the pieces. Love the built in charger strip. Didn't use the light strip. One gripe is the shelf for a PC tower was about 1/2" too short for my PC. I ended up removing the bottom shelf and sliding my PC into the space. It was wide enough with about 1/2" on each side to spare. This was with a full size Lian Li case. One thing that aggravated me to death was the grease on the keyboard slides. You have to disassemble them to install them and I had to wash my hands with Dawn 5 or 6 times so as to not get grease all over the rest of the desk. Hated that! There isn't quite as much room on the desktops as I thought there would be but it is doable. I had a huge desk before and I have a lot of stuff on the desk due to it being home office/personal PC desk. A couple of the screws stripped out so I don't anticipate it going well if I ever had to take it apart and move it. For the price I would probably just disassemble it and toss it. With that being said this is a nice desk for the money. I managed to fit my PC, 22" monitor, printer and a bunch of junk with room for my work laptop and some open desk space for paperwork. The pegboard feels cheesy to me. I wasn't going to install it but I figured it might rigidize the desk so I installed it.Update: I plugged in a neck fan to one of the USB ports in the charger strip to charge it. It showed it was charging but never got above zero percent. I unplugged it and plugged the USB cable into my Anker wall charger and it started charging normally. Doesn't say much for the quality of the charger strip.

Exactly what I was looking for! Arrived in good condition, with all the parts needed. There was even one extra of each screw. It came with a good screwdriver not a plastic cheapy. After having built a similar entertainment center, this desk was a lot easier to put together, LOL. Instructions were easily understood. Build quality is good and I feel it is a fair price for what you're getting. So happy with my purchase.

This desk is.. alright. First off, it was missing the LEDs that it said it came with, but I’ll give customer support that they sent me a new desk since I complained. Building it was pretty easy but man is the alignment is wrong and super wobbly. The quality of everything and the wood is not very good, it’s very mid. The storage on the bottom is nice but if you have a bigger build you won’t fit with it. It’s a bit uncomfortable with my legs but since I always sit with my legs up it wasn’t a concern to me. Labeling of the parts was fine, the stickers are a bit hard to remove and i’d be lying if i said I’ve removed every single one now. Overall, it functions like it needs to, it’s a bit wobbly but it is beautiful and worth it if you’re on a budget.

It’s a bit bigger than expected but it fit perfectly in the space I was intending to put it. It has a lot of space for items on top and inside the upper shelves and the back metal panel is great for putting small items or pictures as I did for decoration. On one side I was able to have a small work space with a 3d printer while on the other a 2 monitor set up with keyboard and mouse with an ample amount of hand room left to spare. Overall the build was around 45min doing it alone, no stress it was worth it. The quality seems fairly durable and has held up a solid month in no complaints! I recommend